Amarinth delivers 18m-long pumps for brand new Indian FPSO

Amarinth has accomplished a US$1.5 million order from Armada Madura for six API 610 VS4 vertical pumps for a new FPSO being constructed for India’s Oil and Natural Gas Corporation Limited (ONGC).
One of the Amarinth 18m lengthy API 610 VS4 pumps for the Armada Madura FPSO in assembly – Image: Amarinth.
Two of the six API 610 VS4 pumps are pour point depressant pumps which are 18m in length and the opposite four are methanol raise pumps which may be 10m long.
All of the pumps have PT100 temperature sensors which were designed and built along the size of the pumps to observe the temperature of each bearing individually.
The 18m long pumps incorporate a supporting system of brackets that Amarinth has designed which attaches every pump to its tank during set up guaranteeing that because the pump is lowered into the tank it remains completely aligned, decreasing vibration and wear during operation.
Once assembled, the pumps had been independently witness tested and certified by DNV at Amarinth’s facility in Rendlesham, UK. The pumps have been then disassembled into 3m segments and shipped to Singapore where the FPSO (floating production storage and offloading unit) is being built.
The pump delivery and installation had to align with the FPSO construct schedule. Because of the size of the pumps, they had to be installed into the vessel’s tanks by way of the deck earlier than another deck above the pumps could probably be constructed. เกจวัดอาร์กอน was accomplished successfully over the Christmas interval with Amarinth’s Engineering Commissioning staff supporting the customer with the set up and commissioning.
The FPSO shall be positioned in the KG-DWN 98/2 subject, roughly 22 km off the east coast of Kakinada, India. The vessel is designed to provide up to 90 000 barrels of oil per day (BOPD) and have a 1.3-million-barrel storage facility. It will be equipped to handle the monsoon conditions prevalent on the subject.
Share

Leave a Comment